Tare Weight | Approximately 8,300 lbs |
GVWR | 80,000 lbs |
Conspicuity | Meets DOT requirements |
Roll Stability System | Included Standard |
Main Beams | Fabricated I-beam with high tensile steel |
Cross Member | Fabricated steel |
Steel and Fasteners | ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better |
Upper Coupler Assembly | 5/16 in pick up plate |
Front Bolster | Fabricated channel with ISO standard twistlocks |
Mud Flaps | 24″ x 30″ white plastic |
Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
Overall Length | 40.5 in |
Overall Width | 96 in |
Maximum Rear Height | 48 in |
Light Attachment, Type | Flange mounted, LED |
LANDING GEAR |
---|
Landing Gear | Two speed AAR approved, square leg. 55,000 lb lift capacity and 160,000 static load capacity |
Landing Gear Foot Group | 10 in. by 10 in. low profile sandshoe |
Crank Handle Location | Road side handle |
BRAKES |
---|
Drum | Steel Outboard mounted (Option: Disc brakes) |
System Type | Standard, 2S1M |
WHEELS |
---|
Rims | 22.5 in x 8.25 in aluminum |
Tires | 295/75R |
Hub Type, Material | Aluminum |
AXLES |
---|
Axle Quantity | 3 Axles |
Axle Centers | 60 inches between axles as required by law |
SUSPENSION |
---|
Suspension Type | Air Ride |
FINISH |
---|
Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
Primer | Zinc rich primer |
Topcoat | Black urethane topcoat |