Flat Bed Trailer

specifications

GENERAL PARAMETERS

  • Length: Exterior – 48′
  • Width: Exterior – 102″
  • Fifth Wheel Height: Nominal 47″
  • Rear Deck Height: Maximum 54 1/2″
  • Capacity: 68,000 lbs. in 10′ and 55,000 lbs.in 4′
  • Tare Weight: 9,950 lbs.
BODY CONSTRUCTION
  • Frame: Fully hot dipped galvanized frame, Main beam is high tensile steel with a thickness of 3/16″ and a 3/8″ (80ksi) flange
  • Front Plate: Aluminum extruded, 6 1/2″ high
  • Rear Plate: Aluminum extruded, 13″ high
  • Fifth Wheel Plate: Nominal thickness of 1/4″ (229″), 80 KSI minimum
  • King Pin: Holland king pin located at 36″
  • Side Rails: Aluminum extruded profile with aluminum rub rail, stack pockets

UNDERFRAME

  • Crossmembers: Hot-dipped galvanized four inch deep I beam on 16″ centers, Crossmembers bolted to main beam using brackets
  • Upper Coupler: A.A.R. rated king pin, 3-3/8″ deep
  • Floor: Aluminum extrusion with four 1 1/8″ thick Apitong wood planks for nailing
  • Landing Gear: Fully hot-dipped galvanized inner and outer legs. Two speed, 50,000 lb. capacity, A.A.R. rated, with 10″x10″ sandshoes, roadside crank handle
  • Underride Guard: Per CMVSS 223 Regulations high tensile steel, bolt-on type with special 4″ square tube, hot dipped galvanized with recess for conspicuity tape with end cap to prevent slippage
SUSPENSION
  • Suspension: Hendrickson Intraaz AAT23K Air Ride with 121″ fixed spread
  • Hub & Drums: Ten stud, hub piloted with outboard mounted brake drums
  • Wheels: Pre-painted white 8.25×22.5 steel disc
  • Tires: Low profiles 22.5 radial tires
  • Five inch round, 22,500 lb. rating, 77-1/2″ track
  • Brakes: Non-asbestos lining 16.5″x7″ quick change type, ‘S’ cam operated automatic slack adjuster
  • ABS System: Two sensor, one modulator valve (2S/1M) system, no diagnostics tool PCL4Trucks compatible system
  • Oil Seals: Stemco Platinum performance

Electrical

  • Lights & Wiring: Color coded 12-volt sealed wiring system, internal ground, and special watertight molded connectors to accept sealed lamps

PAINT

  • No paint on unit. Main bean, crossmembers and rear underride guard fully Hot Dipped Galvanized